This page uses cookies. For details and possible settings refer to our Privacy Policy.
Continuing to use this page means accepting the processing of cookie files.

Accept (hide info)
POL ENG GER 中文

Supported Hardware

Image Acquisition

Adaptive Vision provides support for cameras of the following manufacturers:

Vendor Tested models Remarks

All GigE Vision

Allied Vision Technologies

Automation Technology

Basler

Baumer

Dalsa

Flir

Imaging Source

Kappa

Leutron

Matrix Vision

New Electronic Technology

OKI

PhotonFocus

Vieworks

Xapt

  • Related to Dalsa: There is a syntax error in the Genicam XML configuration file causing "Unable to load IntConverter node "FFOffset_expr" message. Please use this corrected file instead.
  • There is an issue with Baumer SXG80 camera model. Please contact us if you use that model.
  • There is a known issue with image acquisition through GigE in Imaging Source cameras. Please refer to our documentation.
  • There is a known issue with Flir cameras. Please refer to our documentation.

All GenICam
  • Support for LMI Gocator 3D Smart Sensor tested with Gocator 2050.

Allied Vision Technologies
  • FireWire cameras are supported through the AVT FirePackage SDK 3.0.
  • GigE cameras are supported through the PvAPI SDK 1.2.6.

Basler
All cameras are supported through the Pylon SDK 4.0. For more information see Pylon_GrabImage.

Kinect
All devices are supported through the Kinect SDK 1.8, OpenNI 2.2 and NITE 2.2.

Matrix Vision
All cameras are supported through the mvIMPACT Acquire SDK 2.0.1.

NET
  • iCube cameras are supported through the iCube SDK and WebCamera_GrabImage.
  • GigEPRO cameras are supported through the SynView SDK and GigE Vision SDK.

Point Grey
All All cameras are supported through the Fly Capture SDK 2.3.18. For more information see FlyCapture_GrabImage.

XIMEA
All All cameras are supported through xiAPI.

Smart Cameras

Programs created in Adaptive Vision Studio can be run on the following smart cameras models:

Vendor Models Remarks

NET

XIMEA

Frame Grabbers

Adaptive Vision Studio provides support for frame grabbers of the following manufacturers:

Vendor Tested models Remarks

BitFlow
All frame grabbers are supported through the BitFlow SDK version 5.60.

EURESYS
All frame grabbers of Grablink, Picolo and Domino series.

Data Acquisition (DAQ) & Control

Adaptive Vision Studio provides support for Data Acquisition (DAQ) & Control devices of the following manufacturers:

Vendor Tested models Remarks

Advantech
  • All PCI devices are supported through the DAQNavi SDK version 3.00.
  • All ADAM Modbus TCP Modules are supported through the ADAM_TCP filters.

National Instruments
All devices are supported through the NI-DAQmx SDK version 9.2.